DELTAplus - RS Components

Loading...

DELTAplus DIN Rail Mounted electricity meters Technical Documentation

DELTAplus Table of Contents

DELTAplus General Description .......................................................................................................... Chapter 1: Assortment ......................................................................................................................... Assortment Direct connected meters .................................................................................................... Assortment Transformer connected meters .......................................................................................... Accessories ........................................................................................................................ Chapter 2: Technical Data ................................................................................................................... Technical Data ................................................................................................................... Wiring Diagrams and Pulses ............................................................................................. Chapter 3 with LON-bus and M-bus Communication ......................................................................... with EIB communication ..................................................................................................... Chapter 4: Symbols, Definitions and Dimensions ............................................................................... Chapter 5: Electricity Metering ............................................................................................................

4

1

5 6 7 8 9 10 11 12 13 14

2 3 4

15

5

All information in this publication may be subject to change without prior notice

DELTAplus General Description The DELTAplus Meter is an electronic electricity meter for DIN rail mounting in distribution boards or small enclosures. The meter is designed according to ABB’s ProM standard.

Features The DELTAplus Meter is easy to read with its LCD (Liquid Crystal Display) with 7 mm high digits and several symbols. The meter has a polarity independent, solid state (semiconductor) relay that generates pulses proportionally to the measured energy. A red LED (Light Emitting Diode) flashes proportionally to the energy measured. The DELTAplus Meter can be equipped with inputs or outputs for control and alarm handling as well as pulse counting. The meter is equipped with unique instrumentation functions enabling it to read the essential electrical units.

Communication DELTAplus Meters with integrated EIB, M-bus or LON-bus communication, are easy to read remotely in a cost-effective way without conversions via traditional pulsed output. The DELTAplus meter is also equiped with an IR output that can be connected to the ABB Serial Communication Adapter.

Programming Selection of the information in the LCD-display and programming of the DELTAplus Meter is performed via two programming buttons. These buttons can be sealed.

Installation check An installation check that controls the installation runs all the time on all DELTAplus Meters.

Primary measurement function The DELTAplus Meter offers a primary measurement function when connected to external voltage (VT) or current (CT) transformers. The VT and CT transformer ratios, can easily be set with the two programming buttons. This function enables the real energy consumtion to be displayed.

Type Approved All DELTAplus Meters are type approved according to the international standards IEC61036 (for active energy) and IEC 61268 (for reactive energy). These standards cover all technical aspects, climate conditions, electromagnetic compatibility (EMC), electrical and mechanical requirements, and accuracy. The DELTAplus meter carries approval from ie. PTB, NMI and the Swedish National Testing and Research Institute, as a revenue classified meter.

Instrumentation There are instrumentation functions in DELTAplus meters which enable it to read essential electrical units. This means that the user can read out the following from the DELTAplus meters: -Power in kW -Current in A -Voltage in V -Frequency in Hz -Power factor

4

ABB

DELTAplus Assortment

DELTAplus type designation key

Pos Basic Standard Measuring Active - CT/VT connected Active - direct connected Active & reactive - CT/VT connected Active & reactive - direct connected Communication Pulses, Ir-port Mbus, Ir-port Lon, Ir-port EIB, pulses, Ir-port Accuracy Class 1 Class 2 (DB...And DD...types) Voltage 1 x 57-288 V 3 x 100-500 V 3 x 57-288 / 100-500V Optional functionality See ”type” columns for last digits

1

2

3

4

5

6-8

D/S A B C D

1

B M L E 1 2 1 2 3 xxx

DELTAplus, main data -Fully conform to IEC61036 (active energy) and IEC61268 (reactive energy) -Direct connected 5(80) -CT connected 1(6) can be used for transformers -CT-VT ratios programmable (up to 999 999) -Accuracy class 1 and 2 -Tariff 2 or 4 -Communication pulse and/or serial -Installation check automatic -Instrumentation yes -Display 7 digits -IR output yes -Operating temperature -40 C to +55 C

DIRECT Connected meters

Pulse/IR communication VOLTAGE

ARTICLE NO.

ABB ID

MEASURING

3x57-288/ DBB 23000 100-500 DBB 23001 DBB 23002 DBB 13000 DBB 13001 DDB 13000

TYPE

0980800 0980811 0980813 0980801 0980812 0980810

2CMA180800R1000 2CMA180811R1000 2CMA180813R1000 2CMA180801R1000 2CMA180812R1000 2CMA180810R1000

Active Active Active Active Active Active & Reactive

2 2 2 1 1 1

3x100-500 DBB 22000 DBB 22001 DBB 22002

0980802 0980815 0980803

2CMA180802R1000 2CMA180815R1000 2CMA180803R1000

Active Active Active

2 2 2

2 4

1x57-288

0980804 0980816 0980817 0980818

2CMA180804R1000 2CMA180816R1000 2CMA180817R1000 2CMA180818R1000

Active Active Active Active

2 2 1 1

2 2 2

DBB DBB DBB DBB

21000 21001 21002 11001

CLASS

TARIFFS

I/O

ADD.PULSE OUTPUT

2 4 2

For other types, please contact Customer service

ABB

5

DELTAplus Assortment Direct connected meters M-bus communication VOLTAGE

1

ARTICLE NO.

ABB ID

MEASURING

3x57-288/ DBM 23000 100-500 DBM 23001 DBM 23002 DBM 23070 DBM 23020

TYPE

0980840 0980850 0980851 0980852 0980841

2CMA180840R1000 2CMA180850R1000 2CMA180851R1000 2CMA180852R1000 2CMA180841R1000

Active Active Active Active Active

2 2 2 2 2

3x100-500 DBM 22000 DBM 22001 DBM 22002

0980842 0980853 0980854

2CMA180842R1000 2CMA180853R1000 2CMA180854R1000

Active Active Active

2 2 2

1x57-288

0980843

2CMA180843R1000

Active

2

DBM 21000

CLASS

TARIFFS

I/O

ADD.PULSE OUTPUT

2 4 1 2

2 4

LON-bus communication VOLTAGE

TYPE

ARTICLE NO.

ABB ID

MEASURING

CLASS

TARIFFS

3x57-28 / 100-500

DBL DBL DBL DBL

23000 23003 23004 23070

0980820 0980829 0980830 0980821

2CMA180820R1000 2CMA180829R1000 2CMA180830R1000 2CMA180821R1000

Active Active Active Active

2 2 2 2

2 4

3x100-500 DBL 22000 DBL 22003 DBL 22004

0980822 0980831 0980832

2CMA180822R1000 2CMA180831R1000 2CMA180832R1000

Active Active Active

2 2 2

1x57-288

0980833

2CMA180833R1000

Active

2

DBL 21000

I/O

ADD.PULSE OUTPUT

1

2 4

EIB communication VOLTAGE

ARTICLE NO.

ABB ID

MEASURING

CLASS

TARIFFS

3x57-288/ SBE 23000 100-500 SBE 23004 SBE 13000

TYPE

99839053 99839055 99839049

2CMA139053R1000 2CMA139055R1000 2CMA139049R1000

Active Active Active

2 2 1

4

3x100-500 SBE 22000

99839052

2CMA139052R1000

Active

2

1x57-288

99839051

2CMA139051R1000

Active

2

SBE 21000

I/O

ADD.PULSE OUTPUT

For other types, please contact Customer service

6

ABB

DELTAplus Assortment Transformer connected meters Pulse/IR communication VOLTAGE

ARTICLE NO.

ABB ID

MEASURING

CLASS

TARIFFS

3x57-288/ DAB 13000 100-500 DCB 13000 DAB 13001 DCB 13001 DAB 13002 DCB 13002

TYPE

0980806 0980808 0980870 0980872 0980871 0980873

2CMA180806R1000 2CMA180808R1000 2CMA180870R1000 2CMA180872R1000 2CMA180871R1000 2CMA180873R1000

Active Active & Reactive Active Active & Reactive Active Active & Reactive

1 1 1 1 1 1

2 2 4 4

3x100-500 DAB 12000 DCB 12000

0980807 0980809

2CMA180807R1000 2CMA180809R1000

Active Active & Reactive

1 1

1x57-288

0980819

2CMA180819R1000

Active

1

DAB 11000

I/O

ADD.PULSE OUTPUT

1

M-bus communication VOLTAGE

ARTICLE NO.

ABB ID

MEASURING

3x57-288/ DAM 13000

TYPE

0980844

2CMA180844R1000

Active

1

100-500

DCM 13000 DAM 13001 DAM 13002 DAM 13070 DCM 13070

0980847 0980855 0980856 0980845 0980848

2CMA180847R1000 2CMA180855R1000 2CMA180856R1000 2CMA180845R1000 2CMA180848R1000

Active & Reactive Active Active Active Active & Reactive

1 1 1 1 1

3x100-500 DAM 12000

0980846

2CMA180846R1000

Active

1

CLASS

TARIFFS

I/O

ADD.PULSE OUTPUT

2 4 1 1

LON-bus communication VOLTAGE

ARTICLE NO.

ABB ID

MEASURING

3x57-288/ DAL 13000

TYPE

0980823

2CMA180823R1000

Active

1

100-500

DCL 13000 DAL 13003 DAL 13004 DAL 13070

0980828 0980834 0980835 0980824

2CMA180828R1000 2CMA180834R1000 2CMA180835R1000 2CMA180824R1000

Active & Reactive Active Active Active

1 1 1 1

3x100-500 DAL 12000 DCL 12000 DAL 12070

0980825 0980836 0980826

2CMA180825R1000 2CMA180836R1000 2CMA180826R1000

Active Active & Reactive Active

1 1 1

CLASS

TARIFFS

I/O

ADD.PULSE OUTPUT

2 4 1

1

EIB communication VOLTAGE

ARTICLE NO.

ABB ID

MEASURING

3x57-288/ SAE 13000

TYPE

99839046

2CMA139046R1000

Active

1

100-500

SCE 13000 SAE 13004

99839056 99839048

2CMA139056R1000 2CMA139048R1000

Active & Reactive Active

1 1

3x100-500 SAE 12000

99839045

2CMA139045R1000

Active

1

CLASS

TARIFFS

I/O

ADD.PULSE OUTPUT

4

For other types, please contact Customer service

ABB

7

DELTAplus Assortment Accessories The table below, figures, and drawings describe the DELTAplus accessories.

1

ARTICLE NO.

ABB ID

TYPE

APPLICATION

99 99 09 09 09 09 19

2CMA137090R1000 2CMA137091R1000 2CMA132540R1000 2CMA132633R1000 2CMA132541R1000 2CMA132635R1000 GHV210859R00224

Serial Comm. Adapter Serial Comm. Adapter DIN-rail Long cover External counter Front mounting kit Time switch clock for tariff control STT 227

M-Bus RS232 Wall mounting Wall mounting Panel mounting Panel mounting

837 837 811 811 811 811 102

090 091 02 81 04 84 30

99 837 090 / 91 D. 1

DRAWING

1 1 2 3 4 -

60 45

35

90

45

09 811 02

64

D. 2

110.5

09 811 81

122.5

09 811 04

50

D. 3 54,1

2,5

20

23

1

34 31

6

09 811 84 D. 4

100

80

45,5

2

65

123,5 161

50

19 102 30

8

60

ABB

DELTAplus Technical Data

DIRECT CONNECTED METERS

TRANSFORMER-RATED METERS

3 x 57-288 / 100-500 (4-wire) 3 x 100-500 (3-wire) 1 x 57-288 (Single phase) -20% to +15% of nominal voltage < 3 VA, 2 W/phase

3 x 57-288 / 100-500 (4-wire) 3 x 100-500 (3-wire) 1 x 57-288 (Single phase) -20% to +15% of nominal voltage < 3 VA, 2 W/phase

5 80 < 20 < 6 VA/phase

1 6 <2 < 0.08 VA/phase

VOLTAGE/CURRENT UNITS

Voltage [V]

Voltage range Power consumption of voltage circuits Current [A] - base - max Starting current [mA] Power consumption of current circuits

2

GENERAL DATA

Frequency [Hz] Standards

Display of energy Accuracy Voltage transformer ratio Current transformer ratio Maximum transformer ratio Connection area [mm2]: • Current terminals • Voltage terminals

50/60 ± 5% • IEC 61036 for active energy meters of class 1 and 2 • IEC 61268 for reactive energy meters of class 2 • Pulse output according to DIN 43864 (SO) IEC 62053-31 LCD with 7 digits, height 7 mm According to IEC 61036 Cl. 2 or Cl. 1

50/60 ± 5% • IEC 61036 for active energy meters of class 1 and 2 • IEC 61268 for reactive energy meters of class 2 • Pulse output according to DIN 43864 (SO) IEC 62053-31 LCD with 7 digits, height 7 mm According to IEC 61036 Cl. 1 1 - 9 999 1 - 9 999 CT x VT max = 999 999

1.0 - 25

0.5 - 10 0.5 - 10

122.5 97 337.5 7

122.5 97 303.5 7

According to IEC 60695-2-1: • Terminal 960 °C • Cover 650 °C 75% yearly average, 95% on 30 days/year

According to IEC 60695-2-1: • Terminal 960 °C • Cover 650 °C 75% yearly average, 95% on 30 days/year

According to IEC 60529: • IP20 on terminal block without protective enclosure

According to IEC 60529: • IP20 on terminal block without protective enclosure

-40 to +55 -40 to +70

-40 to +55 -40 to +70

DIMENSIONS

Width [mm] Height [mm] Weight [g] DIN modules

ENVIRONMENT

Resistance to heat and fire

Humidity Protection against penetration of dust and water

Temperature range [°C]: •Operating •Storing

ABB

9

DELTAplus Technical Data

DIRECT CONNECTED METERS

TRANSFORMER-RATED METERS

0 - 2.5 (For combined meters 0 - 0.5) 0 - 247 AC/DC (polarity independent) 0 - 100 100 Programmable

0 - 2.5 (For combined meters 0 - 0.5) 0 - 247 AC/DC (polarity independent) 0 - 100 100 Programmable (primary registering)

1000 40

5000 (secondary registering) 40

6 kV 1.2/50µs (IEC 600-60) 4 (IEC 61000-4-4) 80 MHz - 1 GHz at 10 V/m (IEC61000-4-3) 150 kHz - 80 MHz (IEC61000-4-6) According to CISPR 22 class B 15 (IEC 61000-4-2)

6 kV 1.2/50µs (IEC 600-60) 4 (IEC 61000-4-4) 80 MHz - 1 GHz at 10 V/m (IEC61000-4-3) 150 kHz - 80 MHz (IEC61000-4-6) According to CISPR 22 class B 15 (IEC 61000-4-2)

Transparent front glass, bottom case, upper case and terminal cover

Polycarbonate

Polycarbonate

Terminal block Protection class Glow wire test

Glass-fibre reinforced polycarbonate II According to IEC 60 695-2-1

Glass-fibre reinforced polycarbonate II According to IEC 60 695-2-1

276 AC 2.5 0 - 20 AC (“voltage off") 57 - 276 AC ("voltage on")

276 AC 2.5 0 - 20 AC (“voltage off") 57 - 276 AC ("voltage on")

0-2.5 0.5

0-2.5 0.5

PULSE OUTPUT

Connection area [mm2] External pulse voltage [V] Maximum current [mA] Pulse length [ms] Pulse frequency

VISIBLE PULSE INDICATOR

Red LED with frequency [imp/kWh] Pulse width [ms]

2 ELECTROMAGNETIC COMPATIBILITY (EMC)

Impulse voltage test Fast transient burst test [kV] Radio frequency immunity Immunity to conducted disturbance Radio frequency emission Electrostatic discharge (ESD) [kV]

MATERIAL

TARIFF INPUTS (OPTIONAL)

Maximum voltage [V] Maximum wire size [mm2] Input voltage range [V] Terminal wire area [mm2] Lon and M-bus EIB

10

ABB

DELTAplus Wiring Diagrams and Pulses

DBB23XXX

DBB21XXX

DBB22XXX

2 DAB13XXX

DAB11XXX

DAB12XXX

21

20

22

kWh

fig.1

Direct connected meters Three phase system With neutral conductor (see DBB23XXX) Without neutral conductor (see DBB22XXX) One phase system With neutral conductor (see DBB21XXX)

Transformer rated meters Three phase system With neutral conductor (see DAB13XXX) Without neutral conductor (see DAB12XXX)

21

kWh

kvarh

fig.2

20

fig.3

Tariff input ACTIVE TARIFF

INPUT (T1)

INPUT (T2)

Tariff Tariff Tariff Tariff

0* 1** 0 1

0 0 1 1

1 2 3 4

*0 means < 20V **1 means > 57V - 276V Pulse frequency

One phase system With neutral conductor (see DAB11XXX) Tariff input Tariff control by external power supply up to 230 V AC(see fig.1) T1 = tariff input 1 T2 = tariff input 2

Pulse output External power supply up to 247 V AC or DC. Active energy meters (see fig.2) Combined meters (see fig.3)

ABB

DIRECT CONNECTED METERS [IMP/KWH]

1 10 100 500 640 1 000 5 000

TRANSFORMER-RATED METERS [IMP/KWH PRIMARY REGISTERING]

0.01 0.1 1 10 100 500 640 1000

11

DELTAplus with LON-bus and M-bus Communication Inputs or Outputs (option)

Installation (LON-bus)

The meter can be provided with inputs and outputs. The input can be used as a sabotage alarm or as a pulse counter, e.g., for a water meter. The output can be used as an ON and OFF function, for example to switch off the current by remote control. The inputs/outputs are of the opto-switch type and are galvanically isolated from other electronics in the meter. There are two input/ output voltage variants; high and low, see technical data. Both variants are for AC/DC voltage and are polarity independent.

Gren/Red LED Service Pin

Set Scroll

LON-bus C

INP

C

OUT

13

15

13

15

LonWorks network, polarity insensitive

Installation (M-bus)

M-bus

Input/output block

3

C

INP1

INP2

C

OUT1

OUT2

C

OUT1

INP2

13

15

16

13

15

16

13

15

16

Set

Scroll

Functions Inputs and Outputs The input counts and stores pulses. The status can be read both via the bus and on the LCD display. The output can be controlled from a PC by switching ON and OFF and the status can be read at each transmission of data from the meter. M-Bus network, polarity insensitive

LON-bus Protocol The software is compatible with LonMark 3.2 and uses the LonMark-profile Utility Data Logger 1.0. A description of network variables is noted in the DELTAplus User’s Manual, which can be ordered from ABB.

Instrumentation (Optional) Read electrical units and functions, depending on type of DELTAplus meter.

M-bus Protocol

DESCRIPTION

The protocol is based on international standard IEC 870. The bus system is adapted for remote reading of energy meters and works on the principle of master slave.

Active energy, total and per tariff Reactive energy, total and per tariff Transformer ratio Status of inputs and outputs Current and voltage per phase Active power per phase and total Reactive power per phase and total Apparent power per phase and total Power factor, line frequency Status on installation check Interruption counter for line voltage Manufacturer and serial number

Calling direction (master to meter) UMark Start

1

2

3

4

5

6

7

8

Parity

Stop

8

Parity

Stop

UMark -10V

Replying direction (meter to master) IMark +(11-20)mA Start

1

2

3

4

5

6

7

Technical data

IMark

INPUT

Technical Information Operating and display elements: Service pin and LED. Bus interference: FTT-10A. Communication rate: 78 kbps. A software clock is implemented in the Lon-interface to enable readings from the meter to be time-recorded. The clock is based on a timer in the Neuron and is to be set following a power failure. It copes with leap years but not daylight-saving time. The accuracy is ± 2 seconds per 24 hours. 12

Voltage range Input resistance Min. pulse length and pause

0-40 V AC/DC 0-2 V no pulse count 4.5-40 V pulse count 8-13 kohm 30 mS

OUPUT

Voltage range Output resistance Max. current

0-400 VDC, 0-282 V AC 12-36 ohm 120 mA

ABB

DELTAplus with EIB Communication Additional EIB DELTAplus meter Features: Integrated EIB communication interface Remote reading of the following meter data:

Control of the following meter functions: Network monitoring function:

Meter readings in Wh (varh) Current capacity W (var) Meter status and error information. Change of charges, synchronised inquiry of meter readings and Management of error information. Logging and display of up to 24 electrical measured variables.

Automatic check function for wiring with “installation self-test”.

Technical Data of EIB-Connection Network log: ABB i-bus ® EIB connection: Number of participants: Transmission medium: Line lengths:

ABB i-bus ® EIB (European Installation Bus) Bus supply terminal at the front (top) Max. 64 per line (potential total of 14,000 participants) Twisted pair, YCYM or J-Y(St)Y 2x2x0.8 mm Total length of single line ≤ 1,000 m -between two participants ≤ 700 m -between power supply and participant ≤ 350 m

3 For more technical details of the DELTAplus with EIB connection, please contact your local ABB EIB sales organisation.

ABB

13

DELTAplus Symbols, Definitions and Dimensions Type label 13

1 2 3 4 5

12

6 7 11

10

9

NO.

SYMBOL

NO.

SYMBOL

1. 2. 3. 4. 5. 6. 7

Type designation Voltage Frequency Nominal and max. current Accuracy class Pulse output frequency LED frequency

8 9 10 11 12 13

Serial number Week of manufacture Year of manufacture Protective class Approval symbols Network type

8

Symbols for electricity meters

4

Meters with 1 drive system

Meters with 2 drive systems

Meters with 3 drive systems

which have one current and one voltage coil (used for single phase 2-conductor circuits)

each with a voltage and current coil connected as per the two watt-meter method (used for the three phase 3-conductor circuits).

each with a voltage and current coil connected as per the three watt-meter method (used for the three phase 4-conductor circuits).

Terminal area, transformer-rated meter

Terminal area, direct connected meter

1 2 3 4 5 6 7 8 9 11 N

15,5

18,5

5

8

15

7,5

L1 L1 L1 L2 L2 L2 L3 L3 L3 S1 U S2 S1 U S2 S1 U S2

8,5

9

5

7 122,5

122,5

Front view, all meters

Side view, all meters

55,4 2

64,8

45

100

8,5

14

SCROLL

96

SET

50

ABB

DELTAplus Electricity Metering Introduction In most cases, the three-watt meter method is used for power measurements in three phase systems with a current-carrying neutral conductor. Where metering is the basis for billing, this is a requirement. High voltage installations often do not have any current-carrying neutral conductor, therefore the two-watt meter measurement method can be used. Both voltage and current transformers are commonly used. Single phase metering can be used if a three-phase load is balanced. If the DELTAplus meter is directly connected to the mains, the device must be protected by fuses (the possibility to isolate the meter is recommended) on the incoming side. In order to allow maintenance of DELTAplus Meters with current transformers connected, a short circuiting terminal block should be installed near the meter. The voltage supply to the meter must be protected by a max. 10A fuse.

Methods of Measuring Power The single-watt meter method (single phase)

Active and Reactive Power

Load

Active power is needed to perform work. However, consumer equipment often cause a phase shift between current and voltage as a result of the inductive nature of the load, for example in motor drives. The maximum permissable phase shift is governed by the terms of the consumers’ contract with the electricity supplier. If the consumers exceed the specified maximum, they will be liable to an extra charge and would be well advised to install compensation equipment, usually in the form of capacitor banks. Thus it can be seen that the reactive component of the power also is of interest for measurement.

I U P= 3 x IT x UT

In three phase systems the single-watt meter method only gives correct results with a symetrical load on the phases. Since in practice perfectly balanced systems are very rare, this method should not be used for accurate measurements.

5

The two-watt meter method U

U

U

I U

Load U I I Resistive load

I

I Capacitive load

Inductive load

The two-watt meter method is used in three phase systems without a neutral conductor, irrespective of the load symetrical or asymetrical. The three-watt meter method

Resistive loads cause no phase shifts. Inductive loads cause a phase shift in one direction, while capacitive loads produce a phase shift in the opposite direction. As a result, inductive and capacitive loads can be used to compensate each other. The phase shift of the current compared to the voltage results in the power being divided into active and reactive components. The angle between the actual power vector and the active power component is described as phase displacement angle, often referred to as ϕ.

I I

Load

I U

U

U

The three watt-meter method is usually used in three phase systems having a neutral conductor. This method can deal with asymetrical and symetrical loads.

ABB

15

2CMC481002D0008/29567 Österbergs & Sörmlandstryck, 25887 Sweden Production:Lennandia Feb 04

Loading...

DELTAplus - RS Components

DELTAplus DIN Rail Mounted electricity meters Technical Documentation DELTAplus Table of Contents DELTAplus General Description ...

317KB Sizes 0 Downloads 0 Views

Recommend Documents

1000V Insulated Tools - | RS Components
Brand: Ansell, BM Polyco, Delta Plus, Kimberly Clark, RS Pro, Skytec, UVEX. Polo Shirts. Brand: Delta Plus, Dickies, RS

SINAMICS V20 Inverter - RS Components International
5.5 Quick commissioning. SINAMICS V20 Inverter. 58. Operating Instructions, 02/2013, A5E31842719. Connection macro Cn009

Loctite 574 #496-085 - RS Components International
Mar 17, 2017 - Harmful to aquatic life with long lasting effects. Precautionary ... Flush skin and hair with running wat

8-G-7,62-FS4,8 - 1861219 - RS Components
29/10/2015 Page 1 / 6. Header - DFK-PC 4/ 8-G-7,62-FS4,8 - 1861219. Please be informed that the data shown in this PDF D

Analog signal converters, serial data converters - RS Components
2CDC 110 004 0208 | Catalog | ABB 4/2. 4. Analog signal converters, serial data converters. Table of contents. Analog si

RS
ABSTRACT - Vegetation associated to the Paraná River is subject to conditions imposed by the pulse regime. This study ai

RS
Disnea por obstrucción en el tracto de salida del VI y opresión precordial por isquemia secundaria (alteración de la

Automotive Components Manufacturers, Auto Components, Auto Parts
The Group also has several JVs with leading companies from USA, Japan,Italy, and Uzbekistan. Our USP lies in low-cost ma

rs - DOCUMENTS.TIPS
Aug 8, 2015 - Keputusan memberikan penugasan ulang untuk Penilaian kinerja audit medis, memberikan pelayanan kepada pasi

Resoluções | Partido dos Trabalhadores RS - PT-RS
A partir daí, crescem as expectativas de uma reforma tributária progressiva, da continuidade daredução da taxa básica de